Lutron Homeworks Qs Default Password |BEST|
Download ✒ ✒ ✒ DOWNLOAD
Lutron Homeworks Qs Default Password
You can use a bridge to integrate lighting and other automation devices, such as thermostats, security cameras, etc into the Lutron system. To add a bridge, open the Lutron App and tap the black button on the back of the bridge. Make sure your bridge is powered on, and tap the highlighted button on the back of the bridge. This will open a prompt on the bottom of the screen where you can select whether to add the bridge for quick access or prompt the user for an email for password. Note that adding a bridge for quick access will not give you access to pairing unless you use the password to pair the bridge.
The answer to the question whether a homing beacon is used on the Lutron GRAFIK Eye remote control is answered by the administrative answer displayed on the remote control. The remote has no physical means to reset the answer, so it is necessary to perform a battery change on the remote control to clear this question (and optionally to set the correct battery mode).
Component numbering: For button and LED layouts and numbering, see the Lutron Integration Protocol Guide (rev. AA) p.107 ( (opens new window) ). If you are having problems determining which channels have been created for a given keypad model, select the appropriate intlkeypad thing under Settings/Things in the Administration UI and click on the Channels tab. You can also run the command
things show (e.g.
things show lutron:intlkeypad:hwprocessor:kitchenkeypad) from the openHAB CLI to list the channels.